EPS風冷型全自動板材成型機（PSB2000-8000）
主要特點
1.機器采用鋼焊接而成，并經過時效熱處理，使機器強度高，不變形，能承受高密度制品的膨脹力。
2.采用PLC全電腦顯示熒屏控制，使機器的開模、合模、上料、加熱、保溫、風冷卻、脫模、頂出成品，實現全自動化循環作業。
3.機器模腔表面采用特制鋁合金板，熱傳導好，抗拉強度高，使用壽命長。
4.采用穿透加熱成型工藝，設置變壓鼓風機吸料，冷卻，穿透力強，粘結性好，用汽少，成型快，含水率低，保證產品內外一致。
Characteristics
1.Adopt high quality steel in the machine and combining with heat treatment to strengthen machine intensity,without changing its shape .It can bear expansibility of high intensity product.
2.Adopt PLC computer touch screen in screen control to realize automatic circulation work ranged from mold open,mold close,charging,heating,preservation,air cooling,stripping and cjection
3.Adopt special aluminum alloy plate in machine cavity,high thermal conductivity,good extcnsion and long lifetime
4.Adopt advanced and unique heating and molding technology from overseas,set transformation blower to sucking materials.If features strong penetration,good viscosity,less gas consumption,fast molding,low water content to ensure consistence between inside and outside
技術參數
| 項目 | 單位 | PSB-2000 | PSB-3000 | PSB-4000 | PSB-6000 | PSB-8000 |
| 模腔內凈尺寸 | Mm | 2040×1020×530 | 3060×1250×630 | 4080×1250×630 | 6120×1250×630 | 8160×1250×630 |
| 模腔體積 | M3 | 1.10 | 2.41 | 3.21 | 4.82 | 6.43 |
| 制品密度/比重 | Kg/ M3 | 6-30 | 6-30 | 6-30 | 6-30 | 6-30 |
| 生產效率（標準條件） | Piece/h | 2-9 | 2-9 | 2-9 | 2-8 | 6-8 |
| 蒸汽壓力 | Mpa | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 | 0.6-0.8 |
| 壓縮空氣進口通徑 | Mm | 80 | 80 | 80 | 80 | 80 |
| 蒸汽進口通徑 | Mm | 80 | 80 | 108 | 159 | 159 |
| 電源 | v | 380 | 380 | 380 | 380 | 380 |
| 總電機功率 | Kw | 7 | 7 | 13 | 13 | 13 |
| 大外型尺寸 | Mm |
3600×2000 ×2750 |
4500×2150 ×2950 |
5500×2150 ×2950 |
7500×2150 ×2950 |
9500×2150 ×2950 |
| 整機重量 | kg | 2800 | 4600 | 6000 | 9600 | 10600 |
發貨現場
相關產品
